Neato Support

We're here to help.

  Back

Using the Botvac D7 Connected: Start Button and LED Feedback

Understanding the Start Button and LED indicators on the Botvac D7 Connected.

D7Front.png

 

House Clean LED:  House_Cleaning.png
   
Spot Clean LED:  Spot_Cleaning.png

 

  Action  HOUSE CLEAN LED  SPOT CLEAN LED
Start Cleaning   

Press Start Button 1x for house cleaning 


Solid Blue 

 


Press Start Button 2x for spot cleaning

  Solid Blue
Pause/Resume Cleaning Press Start Button during cleaning to pause robot Pulses while paused  Pulses while paused
Press Start Button again to resume cleaning  Solid Blue  Solid Blue 
Cancel Cleaning
(When paused)
Press & hold start button for 5 seconds  Turns off and robot plays a tone  Turns off and robot plays a tone 

 

Battery LED:  battery_led.png

 

ROBOT IS: LED COLOR WHAT IT MEANS
Cleaning    

Solid Green


Battery level is normal


Solid Yellow

Battery level is low and must be charged before a new cleaning can be started
Solid Red Battery level is low, and robot must return to charge base
Charging Green (Solid or pulsing) Battery is charging, and robot can start cleaning
Pulsing Yellow Battery level is low, and robot must return to charge base
Solid Red Battery level is low, and robot must return to charge base

  

WiFi LED:  wifi_logo.png

 

LED COLOR  WHAT IT MEANS 
Soft Glowing Blue

Robot is in Pairing Mode

Fast Blinking Blue

Pairing to Neato app/account

Fast Blinking Red Error Connecting
Solid Blue Pairing Successful
No Light Robot Offline - please connect to access additional features

 

  • If you’ve already paired; “Fast Blinking Blue” means the robot has lost connection. The robot could be out of range, your Wi-Fi network may be down, or another Wi-Fi issue may have occurred. If out of range, the robot will automatically reconnect when it comes back within range. Otherwise, check your router to make sure it’s operating normally.
 
Was this article helpful?

  Back