This article applies to the following:
- D3
- D4
- D5
- D6
- D7
To power cycle your Connected-Series robot
- Press and hold the START button for 15 seconds, until the robot shuts down.
- Press the START button again, and the robot will power on and reboot.
Note: If the robot was connected to Wi-Fi, it will automatically attempt to reconnect. Network re-connections may take up to 3 minutes, depending on your network signal strength.
Still having problems? If the above has not solved the issue / answered your question, please contact one of our customer support agents. Click the blue chat icon, or visit our Customer Care Contact page for more options.